GENERAL MERCHANDISE SECTION RED PART NUMBERS INDICATE NEW PARTS 10-58 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Engine Top End Tools THREADED HEAD HOLDING TOOL FOR 12MM AND 14MM THREADS PISTON PIN BUSHING REAMER TOOL FOR BIG TWIN & SPORTSTER This tool mounts in any bench vise in any position, and holds the cylinder head securely in place for all types of head work. Made of steel and zinc plated, this 10” long tool offers 12mm threads on one end and 14mm threads on the other end. The hex portion of the shaft of the tool is also drilled for clean and easy wall storage. Part 60798 • Fits Big Twin (except TC88) & Sportster all years, stock through 5” strokers • Designed to accurately ream to size a clean, straight, and round bushing hole in one pass. • No need to remove connecting rods from the crankcase. Fits Big Twin & Evolution Tappets. The popular and effective bleed technology that is found in the JIMS® brake bleeding tool has now been applied to hydraulic lifters. A special jar, designed for vacuum, holds up to four hydraulic lifters in a convenient tray. Once vacuum is applied, bubbles can be seen escaping from the lifters until they are completely bled. Lifters are now ready to install. No more abuse of the starting system to pump up the lifters, and no risk of damage to the valve train by running the engine, even at low RPM, when lifters have not been fully bled. Part 60752 KEEPER TOOL FOR MOST PUSHROD COVERS • Designed to compress the spring cover with one hand, when removing or installing the retainer clip. • This is the most professional tool available for the type of service it performs. • 13” long for good leverage, and made from steel for strength. • Rubber coated handles for comfort. Fits all OHV models (except Sportster 1991/Later) Part 60715 VACUUM TAPPET “PUMP UP” TOOL Part 60866 • Quick release system presses straight against the retainer to eliminate side loading the valve and keepers. • Works on all motorcycle, Milwaukee-Eight®, ATV, UTV, and small engine cylinder heads. • Billet 6061 aluminum frame provides unmatched strength, stiffness, and lower weight. • Fully adjustable top and bottom. • Aluminum lower adjuster will not damage or sctratch valves. • Includes two universal fork style tips (24mm and 28mm outside diameter). • Durable blue anodized finish with laser engraved markings. • Simple, fast, and easy to use. VALVE SPRING COMPRESSOR Part 60755 This Universal Driver Tool is used with many of Jims Tools, and it is sold separately to decrease your tool costs. It features a knurled 1” O.D. grip and is a total of 12” long. The 1/2” O.D. pilot includes an O ring to hold the installed tool in place. Pazt 60751 UNIVERSAL DRIVER TOOL FOR JIMS TOOLS
RkJQdWJsaXNoZXIy MzYzNTI=