GENERAL MERCHANDISE SECTION RED PART NUMBERS INDICATE NEW PARTS 10-76 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Miscellanious Transmission Tools SHIFT FORK ALIGNMENT GAUGE FOR EARLY BIG TWIN 4 SPEED This is a must have tool designed to be used any time the shifter top has been removed for any reason. This tool gauges off of the shifter drum and transfers the exact position of the shift forks in relation to the gears. Fits Big Twin 1936/Early 1979 with hand shift top or ratchet top transmission. (Rpls. HD 96384-39) Part 70413 SHIFT FORK ALIGNMENT GAUGE FOR BIG TWIN • This gauge is used to set and align shift forks. (Rpls. HD 96385-78A) Part 70414 For Big Twin 4 speeds Late 1979/Later When it comes to servicing the inner primary bearing and seal, do it the JIMSTM way. This American made tool has a lifetime warranty, and drives the bearing and seal perpendicular to the case, without an arbor press. We have taken its proven design and added on 2006 Dyna, and all 2007 to present Big Twin models. This tool easily removes and installs the inner primary roller bearing, and installs the seal and bearing to factory specified depths. INNER PRIMARY BEARING AND SEAL REMOVAL/INSTALLATION KIT Part 70461 MAINSHAFT BEARING INNER RACE TOOL FOR BIG TWIN • Designed to remove and install the pressed on bearing inner race on the transmission mainshaft. • Works on the bike or on the workbench. Part 70434 Fits Big Twin Late 1984/Later MAIN DRIVE GEAR AND BEARING TOOL FOR 5 SPEED TRANSMISSION • Removes and installs the main drive gear and bearing without removing the transmission case from the bike. • Will not damage the bearing or main drive gear during installation. Use on Big Twin 1980/Later, Sportster & Buell® 1991/Later Part 70438
RkJQdWJsaXNoZXIy MzYzNTI=