ENGINE SECTION RED PART NUMBERS INDICATE NEW PARTS 6-8 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Cylinder Base Related & Compression Release DECORATIVE CAPS FOR COMPRESSION RELEASE VALVES • Includes silicone adhesive for easy installation. • CNC machined from billet aluminum. • Sold as a pair. • Designed to lower the compression for the purpose of reducing extreme pressure imposed on the starter motor and battery. • Simply push the caps down to open the release valves, start the engine and the valves will close by themselves. • These valves require head removal and installation next to the spark plug by a qualified machinist. • 10mm x 1.0 thread pitch, overall length is 1 13/32 with 10mm thread length. • Note: As with any machining process, verify for sufficient material thickness before any machine work is done. Part 60011 Fits compression release valves up to .485” O.D. Shown installed COMPRESSION RELEASE VALVES FOR HIGH COMPRESSION ENGINES Part 60010 Each 60615 60616 60614 • Adds a show chrome look to the left side of your engine. • Easy to install. • Includes hardware. 1engine finishes. CYLINDER BASE/CRANKCASE COVER FOR BIG TWIN AND SPORTSTER Model & Year Rpls HD# Part # Dyna 2006/Later & FLT & FLH 2007/Later 32077-07 60616 (Except CVO models & models equipped with 110 CI engines) Softail 2007/Later 32042-07 60615 Sportster 2004/Later 32729-07 60614 BASE GASKET BY-PASS PIGTAIL® KIT FOR BIG TWIN & SPORTSTER • If you have an Evolution with about 20,000 miles on it, you have a base gasket leak! The factory has tried to remedy this problem with at least four different styles of cylinder studs, to no avail. • Eliminates top end drain back oil from even touching the base gasket. • For best results use with metal base gaskets. • Tap the cylinder in the top end oil drain back hole with the supplied aluminum tap and install the PigTail® with about one inch left protruding to be inserted into the crankcase. • Can be easily removed for cylinder service. • Designed for OE size cylinders (not intended for big bore cylinders). • Instructions included. Part 60146 Part 60145 Complete Kit Fits Big Twin Evolution 1984/1999 & Sportster Evolution 1986/Later PigTail Inserts only, pack of 2 REPLACEMENT PART Valve
RkJQdWJsaXNoZXIy MzYzNTI=