DRIVE TRAIN SECTION RED PART NUMBERS INDICATE NEW PARTS 7-116 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL REAR DRIVE CHAINS FOR ALL MODELS 530 RT (Standard Roller) • Intended for normal street use. These chains ensure high mileage with reduced elongation. • Assembled with solid bushings and rollers. Shot peening of plates, pins and rollers to increase the fatigue resistance. • 7,756 lbs. average tensile strength. • Includes clip-type and rivet-type master links. 530 ZRP2 (Drag Racing Z-Ring) • Heavy duty version of the standard Z-Ring chain. • 9,442 lbs. average tensile strength. • Includes 2 rivet-type (solid end and hollow end) master links. 530 ZRT (Z-Ring) • Patented Z-Ring technology. • Z-Ring technology provides enhanced chain flexibilty. • Lubricants trapped between side plates keep unit lubricated and increases its life. • 8,992 lbs. average tensile strength. • Includes 2 rivet-type master links (solid end and hollow end) and 1 clip-type master link. 104 Chain 110 Chain 114 Chain 120 Chain Chain Style Pitches Pitches Pitches Pitches Master Link 530 RT (Standard) 76611 76612 76613 76614 76407 (Clip Link) 530 ZRT (Z-Ring) 76615 76616 76617 76618 76408 (Clip Link) 530 ZRP2 (Drag Racing Z-Ring) ------ ------ ------ 76619 76409 (Solid End Rivet Link) REAR CHAIN PART NUMBERS Regina Z-Ring Master Links 76407 76408 Performance In Motion 76409 Note: While using the chain breaker (Type 1) to disassemble an O-ring chain, it is necessary to protect the O-rings from forces the chain breaker produces that would otherwise squeeze or possibly cut the O-rings. Therefore, in rivet connecting link packages, Regina® includes a formed wire shim to be placed between the plates that will be disassembled. This will protect the O-rings and the bushings from damage or partial disassembly of the inner link. Type 1
RkJQdWJsaXNoZXIy MzYzNTI=