DRIVE TRAIN SECTION RED PART NUMBERS INDICATE NEW PARTS 7-123 1 2 3 4 5 6 7 8 9 10 11 CONTENTS ELECTRICAL FRAME FRONT END CONTROL WHEEL ENGINE DRIVE TRAIN FUEL EXHAUST GENERAL REFERENCE Rear Drive Belts 1 1/2” Wide Belts for Big Twin Model, Year & Description # of Teeth Panther Part # Gates Part # Falcon SPC Part# Short length for special pulley combinations 125 77506 77534 –– 4 Speed models 1980/Later (Rpls. HD 40003-79) 126 77524 77536 77571 4 Speed models (extra long) 127 77525 77537 –– FLT 1985/1996 & FXR 1985/Later (extra short) 135 77526 77545 77588 FLT 1985/1996 & FXR 1985/Later (Rpls. HD 40001-85) 136 77527 77546 77592 FLT 1997/2003 (Rpls. HD 40024-97) 139 77563 77559 77596 Softail 1986/1999 with 70T rear pulley (Rpls. HD 40023-86) 132 77528 77541 77580 Softail 1993/1999 with 61T rear pulley (Rpls. HD 40012-90) 128 77508 77531 77575 Softail 1995/1999 with 65T rear pulley (Rpls. HD 40017-94) 130 77510 77539 77577 Dyna 1991/1999 (Rpls. HD 40015-90) 133 77530 77543 77584 1” Wide Belts for Custom Wide Tire Use # of Teeth Panther Part # Gates Part # Falcon SPC Part # 130 77512 77540 77579 131 –– 77604 –– 132 77513 77542 77582 133 77516 77544 77586 136 77532 77547 77594 137 –– 77560 77574 139 –– 77570 77598 140 –– 77600 77573 REAR DRIVE BELTS FOR STOCK & WIDE TIRE USE • Panther brand with “ultra-cord” by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts. • The parabolic tooth profile (grooved) prevents air entrapment, resulting in a quieter drive. • A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance. • Gates brand (polychain) are the same drive belts used by the Motor Company since 1980, because of their reliability. • The teeth have a very slick surface that is easy on the pulleys. • The outer perimeter is ribbed to help improve flexibility, and cannot be used with a belt tensioning roller. • Falcon SPC (sport plus carbon) is a carbon fiber-reinforced Goodyear Engineered Product. • 33% more tensile strength, and engineered specifically for motorcycles. • Features a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance. To determine belt length with different pulley combinations or custom frames, see 7-124 . NOTE: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts. 1 1/8” Wide Belts for Sportster Year & Description # of Teeth Panther Part # Gates Part # Falcon SPC Part# 1991/2003 with 55T pulley (Rpls. HD 40038-91) 125 77507 77535 –– 1991/2003 with 61T pulley (Rpls. HD 40022-91) 128 77509 77538 77576 2004/2006 with 68T pulley (Rpls. HD 40571-04B) 137 –– –– 77565 1 1/8” Wide Belts for Custom Wide Tire Use # of Teeth Panther Part # Gates Part # Falcon SPC Part # 125 77507 77535 –– 126 –– 77557 77572 128 77509 77538 77576 130 77549 77552 77578 132 77550 77553 77581 133 77551 77554 77585 135 –– 77558 77589 136 77555 77556 77593 139 77564 77561 77597 1 1/8” Wide Belts for Big Twin Model, Year & Description # of Teeth Panther Part # Gates Part # Falcon SPC Part# Softail 2000/2006 with 70T pulley (Rpls. HD 40307-00) 135 –– 77558 77589 Dyna 2000/2006 (Rpls. HD 40015-00) 133 77551 77554 77585 Touring Models 139 77564 77561 77597 Available in your choice of Panther, Gates or Falcon brands
RkJQdWJsaXNoZXIy MzYzNTI=