DRIVE TRAIN SECTION RED PART NUMBERS INDICATE NEW PARTS 7-125 1 2 3 4 5 6 7 8 9 10 11 CONTENTS ELECTRICAL FRAME FRONT END CONTROL WHEEL ENGINE DRIVE TRAIN FUEL EXHAUST GENERAL REFERENCE Wide Tire Related Model & Year # of Teeth Rpls HD Part # Softail 2006 135 40655-06 77591 Softail 2007/Later 133 40073-07 77587 Softail 2007/Later with 32/64 drive ratio 132 40074-07 77583 • Available your choice of either Dayco Panther ultra-cord, Falcon or Gates. • 1” wide drive belts designed for use with 1” wide rear pulley. • Can be used with the standard width transmission pulley. • When used with other than standard 32 tooth transmission pulley, refer to chart on 7-124 to determine correct drive belt length. 1” WIDE REAR DRIVE BELTS FOR WIDE TIRE SOFTAIL, DYNA & FXR 20MM WIDE BELTS FOR BIG TWIN • Install a 180 series tire on a 5 1/2” wide wheel in your standard width frame. • Order the 77364 Rear Pulley Spacer and Bolt Kit if using a stock width belt drive hub. • A wide rear fender suitable for use on a 180 series tire must be used. • The section of frame behind the shock must be widened on FXR and Dyna models. • Not intended for use as replacement belt for models equipped with 1” drive belts from the factory. Drive Belts Rear Pulley Spacer and Bolt Kit Part 77364 • Machined billet aluminum. • .937” thick. • Includes chrome plated mounting hardware • Designed to be used on models with 1986/1999 belt drive rear hubs and 1” wide rear pulleys. • Carbon fiber reinforced belt. • 33% more tensile strength than conventional aramidreinforced belts. • High temperature rubber compounded belt provides excellent flex and service life. • Features a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance, all while able to sustain belt-penetrating debris without breakage. NOTE: 1 ” wide pulley belts are designed for custom show only. They are not intended to be used in lieu of an 1 1/2” wide pulley and belt. Use of a 1” wide pulley and belt is at the user’s discretion, and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA. Belt Panther Gates Falcon SPC Fits Teeth Part # Part # Part # Softail & Dyna models with 65 tooth rear pulley 130 77512 77540 77579 Dyna 2007/2015 with 66 tooth pulley 131 –– 77604 –– Softail models with 70 tooth rear pulley 132 77513 77542 77582 FXR with 65 tooth rear & Dyna with 70 tooth rear pulley 133 77516 77544 77586 FXR models with 70 tooth rear pulley 136 77532 77547 77594 Touring Models 2009/2015 with 68 tooth rear & Dyna with 140 –– 77600 –– 70 tooth rear pulley NOTE: 2 0mm are not intended to be used in lieu of an 1 1/2” wide pulley and belt. Use of a 20mm wide pulley and belt is at the user’s discretion, and no warranty claims are made or implied by Belt Drives Ltd. or MID-USA.
RkJQdWJsaXNoZXIy MzYzNTI=