EXHAUST SECTION RED PART NUMBERS INDICATE NEW PARTS 9-22 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Cadmium EXHAUST PORT TORQUE CONES FOR BIG TWIN & SPORTSTER Installation Location • Improves power by increasing the exhaust gas velocity. • Helps to reduce exhaust reversion. • Simple installation requiring no permanent modification. • Great for use with unbaffled exhaust that require some type of back pressure to run right. • CNC machined with precise angles for maximum effect. • Extra exhaust port gaskets are not required. • Sold in pairs. Model & Year Part# All Evolution models, all years & 95117 Twin Cam 1999/Later Shovelhead Models 1966/1984 95115 EXHAUST O2 SENSOR REDUCER Part 95138 • Oxygen sensor conversion plug. • Use for 12mm sensor into 18mm hole. • Sold each. Torque Cones & O2 Eliminator Plugs Description Thread Finish Part # Eliminator 18 x 1.5mm Chrome 95141 Plug 18 x 1.5mm Raw Steel 95133 12mm Raw Steel 95155 Weld Nut 18 x 1.5mm Raw Steel 95132 12mm Raw Steel 95156 OXYGEN SENSOR ELIMINATOR PLUG & EXHAUST WELD NUT • Use the weld nut for exhaust head pipes that have no bung for an oxygen sensor. • Use the eliminator plug when you have eliminated the oxygen sensor from your exhaust & need to plug the existing open hole. Note: 12mm is OE on 2010/Later Dresser models. 95141 95132 95133
RkJQdWJsaXNoZXIy MzYzNTI=