GENERAL MERCHANDISE SECTION RED PART NUMBERS INDICATE NEW PARTS 10-21 1 2 3 4 5 6 7 8 9 10 11 CONTENTS ELECTRICAL FRAME FRONT END CONTROL WHEEL ENGINE DRIVE TRAIN FUEL EXHAUST GENERAL REFERENCE Sealer, Gasket Maker & Thread Sealant Part 05423 Part 05421 Part 07530 Part 05422 Aluminum Clear (Rpls. HD 99814-97) Black (Rpls. HD 94562-98) These tubes of silicone can be used as refills for the above Tube-Grips or can be used by themselves. Each tube contains 3 ounces (85 grams). Sealer/Gasket Maker Only Tube-Grip® The Tube-Grip® is designed to dispense the silicone sealer with a pin point accuracy and controlled flow. It will flatten the tube from the tail end out, thus eliminating any wasted silicone that would normally get stuck in the tube. The dispenser tip can be modified to produce a precision line or a wide ribbon type pattern. Silicone sold separately. No shop or home garage is complete without the eighth wonder of the world...Silicone, and it is not just for body enhancement anymore. With thousands of uses, we have a color to match your needs. This Silicone can be used in a temperature range of -80ºF to + 600ºF and is solvent resistant. For best results, clean parts prior to assembly with 05218 Solvent 184. SILICONE SEALER AND GASKET MAKER NON-HARDENING GASKET SEALER/MAKER & THREAD SEALANT • Non-hardening polyester polyol-based compound that turns from a gel into a flexible putty within minutes of application. • This “state of the art” sealer was originally developed by Rolls Royce, where it performed under the most stringent aerospace tolerences. • Withstands temperatures up to 600˚ Fahrenheit and will seal gaps up to .010”. • Impervious to gasoline, oil, glycol or any motorcycle related fluid and is oxygen sensor safe. • To remove the applied hylomar, simply use our 05218 Solvent 184. *Not Shippable By Air. Part 05415* 200ml Spray Can By 100 gram Tube 8.45 fl/ oz. Brush in Cap Part 05433 Part 05424 Part 05258 • Lucas X-TRA Heavy Duty Grease is the end result of years of research and a brand new technology. • Completely recovers after being extremely overheated. • Virtually wash-out proof. • Lasts up to four times longer than conventional lithium grease. • Exceeds OEM “Lube For Life” specifications. • 16 oz. tub. • Sold each. X-TRA HEAVY DUTY GREASE This high temperature Hylomar® Copper Anti-Seize Lubricant is specifically designed to protect metal fasteners from galling, corrosion and seizing. Use of this lubricant makes for easier disassembly of spark plugs, cylinder head bolts and exhaust bolts. Copper Anti-Seize can also be used in a wide variety of applications such as threaded assemblies, hinges, lever pivot points, brake caliper sliding mounts and brake bleeder screws. It adheres well to metal surfaces, and it’s water resistant and contains no harmful lead or zinc. Cap includes a built in brush for a no mess application. Net weight 8 ounces. Sold each. HIGH TEMP ANTI-SEIZE Part 05090 Not Shippable By Air. Not Shippable By Air.
RkJQdWJsaXNoZXIy MzYzNTI=