CAMS WITH GEAR FOR PANHEAD & SHOVELHEAD 1948/1984

CAMS WITH GEAR FOR PANHEAD & SHOVELHEAD 1948/1984
Manufacturer: ANDREWS PRODUCTS INC
Availability: In stock
Part #: 66808
Weight: 1.94
  • Whether you want a better street cam for a stock motor, a big lift cam for a hotrod bike, or something in between then these cams are what you are looking for
  • All of these cams are computer designed and precision ground from alloy steel billet
  • Timing and Duration measured at .053" cam lift
Note: 1948/1957 Panhead models require engine case machining for installation of a 1958/1984 style cam shaft needle bearing

Note: Rocker arm ratios are as follows, Panhead 1.5:1, Shovelhead 1.43:1. 1980/1981 Shovelhead motors with anything higher than a valve lift of .430" will require valve guide to top spring collar clearancing
Andrews
Application: Street/Drags - Much more mid-range & high end power. Idle smoothness unaffected. The cam for modified 74ci/80ci & small strokers. Spring spacing required.
Timing: Intake 26/50, Exhaust 53/25
Duration: Intake 256, Exhaust 258
Grind: B2, Year: Late 1977/1984
Valve Lift: Shovelhead .485", Panhead .507"
By: ANDREWS PRODUCTS INC
Customers who bought this item also bought

BRAKE ROTOR ADAPTER RING FOR CUSTOM USE

58330
BRAKE ROTOR ADAPTER RING FOR CUSTOM USE

POWER HOUSE PLUS SINGLE POLE THERMAL TYPE CIRCUIT BREAKERS

12111
POWER HOUSE PLUS SINGLE POLE THERMAL TYPE CIRCUIT BREAKERS

WHEEL BEARINGS FOR MOST MODELS

57304
WHEEL BEARINGS FOR MOST MODELS

V-FACTOR STARTER SOLENOID BOOT FOR BIG TWIN & SPORTSTER

17704
V-FACTOR STARTER SOLENOID BOOT FOR BIG TWIN & SPORTSTER