CAM AND GEAR SETS FOR SPORTSTER

Manufacturer: ANDREWS PRODUCTS INC

Availability: In stock

Part #: 66844

Your price:

Weight: 4.31
A camshaft upgrade is the most logical step after air filter, exhaust, carburetor, and ignition system improvements have been made. It will improve mid and upper-end power. All camshafts listed are ground with stock size base circle and can be used with stock push rods. Instructions included.

Cam Specifications - with stock 1.43:1 rocker arm ratio
Cam Grind	Valve Timing	Duration @ .053"	Duration @ .020"	Valve Lift	Overlap @ .053"	Lobe Centerline	Lobe Separation Angle	TDC Lift at Valve
Q stock (76/85)	10/32 35/07	222 222	262 262	.400 .380	17	101 104	102.5	.114 .114
Y	35/47 53/29	262 262	310 310	.425 .425	64	96 102	99	.206 .182
V9	32/52 52/32	264 264	311 311	.490 .490	64	100 100	100	.207 .207

Cam Specifications - with stock 1.625:1 rocker arm ratio
Cam Grind	Valve Timing*	Duration @ .053"	Duration @ .020"	Valve Lift	Overlap @ .053"	Lobe Centerline	Lobe Separation Angle	TDC Lift at Valve
D stock (88-91)	02/41 41/02	223 223	270 270	.458 .458	04	109.5 109.5	109.5	.094 .094
V2 N2	22/38 46/18	240 244	290 290	.465 .440	40	98 104	101	.180 .155
N4	52/24	256	296	.490	54	104	101	.189
N8	56/28	264	302	.500	60	104	100	.212

* timing listed for .053 lift figures.
For stock 883cc, 1100cc or 1200cc engines. More duration and lift means extra power. Stock springs and lifters can be used. Special requirements: bolt-in. Power range 2000/6000 RPM. Cam Grind N2. Fits Evolution Sportster 2000/Later.
By: ANDREWS PRODUCTS INC

Not legal for sale or use in California, or on any pollution controlled vehicles.

Customers who bought this item also bought

CAM AND GEAR SETS FOR SPORTSTER

POWER HOUSE PRIMARY/DERBY COVER GASKETS

THROTTLE, IDLE & CLUTCH CABLES FOR BIG TWIN WITH OE CONSTANT VELOCITY (CV) CARBURETOR

CAM/GEAR CASE PARTS FOR K MODEL & SPORTSTER ALL YEARS

THROTTLE, IDLE & CLUTCH CABLES FOR BIG TWIN WITH OE CONSTANT VELOCITY (CV) CARBURETOR