GEAR DRIVE CAM KITS FOR TWIN CAM 2007/LATER & 2006 DYNA MODELS

GEAR DRIVE CAM KITS FOR TWIN CAM 2007/LATER & 2006 DYNA MODELS
Manufacturer: ANDREWS PRODUCTS INC
Availability: Out of stock
Part #: 66986

Weight: 3.01

  • Reduced maintenance (no plastic chain guides or tension shoes to wear and contaminate engine oil or clog oil passages)
  • Cam timing remains constant; all drive and cam gears utilize a light press fit (gear lash) thus eliminating any chain stretch
  • Bearing loads are reduced; no chain tensioners are used which can rob horsepower
  • Critical sprocket alignment is unnecessary
  • To ease installation and eliminate the need to remove the fuel tank and rocker covers, use our adjustable pushrods found in the engine section
  • Includes instructions

26HG Cam Kit
Timing(*): 11/35 & 41/09
Duration @ .053: 226 & 230
Duration @ .020: 262 & 266
Valve Lift: .490 & .490
Lift @ TDC: .138 & .120
Stock Springs

Application: Bolt-in Cam for 96": stock compression ratio. Great for two up touring, this cam will add torque and horsepower at lower and middle RPM ranges (1800-5200 RPM)

ANDREWS PRODUCTS INCĀ®

Not legal for sale or use in California, or on any pollution controlled vehicles.